IRS21814SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS21814SPBF |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 2.3A |
| Power Supplies | 15V |
| Nominal Supply Current | 240μA |
| Power Dissipation | 1W |
| Output Current | 1.9A |
| Max Supply Current | 240μA |
| Propagation Delay | 330 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 35 ns |
| Release Time | 220 ns |
| Rise / Fall Time (Typ) | 40ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.9A 2.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.33 μs |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 8.7376mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS21814SPBF Overview
The 14-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tube is the packaging method.Ideally, it should be mounted in the direction of Surface Mount.Using a 10V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.A gate type of IGBT, N-Channel MOSFET has been used in its design.Temperature range -40°C~150°C TJ is allowed for this device.The input type is Non-Inverting.The configuration starts with 14 terminations.Many related parts can be found under its base part number IRS21814SPBF.Surface Mount is the way it takes to mount the device.During design, it is configured with 14 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.There is an interface IC called BUFFER OR INVERTER BASED PERIPHERAL DRIVER that is employed in this device.An output current as high as 2.3A can be achieved at maximum power.Within this subcategory of MOSFET Drivers, there are several useful electronic components.Ideally, the high-side voltage should not exceed 600V.There are 2 outputs integrated for its basis.Mosfet gate drivers can deliver a current of 1.9A.According to its maximum power dissipation, 1W is capable of conducting and transferring a large amount of power without overheating.Mosfet gate drivers is recommended that you keep the supply current at 240μA in order to achieve greater stabilMosfet gate driversy.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 15V.In this case, it produces a voltage of 20V.
IRS21814SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS21814SPBF Applications
There are a lot of Infineon Technologies IRS21814SPBF gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- UPS systems
- Smart Phones
- PCMCIA applications
- A/D drivers
- Portable computers
- High power buffers
- Isolated Supplies for Motor Control
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Portable Media Players
