IRS21814STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS21814SPBF |
| Output Voltage | 10V |
| Max Output Current | 2.3A |
| Nominal Supply Current | 240μA |
| Power Dissipation | 1W |
| Output Current | 1.9A |
| Max Supply Current | 240μA |
| Propagation Delay | 330 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 40ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.9A 2.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.33 μs |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 8.7376mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS21814STRPBF Overview
The 14-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tape & Reel (TR) is the packaging method.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Ideally, it should be mounted in the direction of Surface Mount.A supply voltage of 10V~20V demonstrates its superiority.This gate type has a IGBT, N-Channel MOSFET design.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver accepts input of type Non-Inverting.Its configuration is based on a total of 14 terminations.You will find various related parts under the base part number IRS21814SPBF.Surface Mount is the way it takes to mount the device.Mosfet driver is configured wMosfet driverh 14 pins when designing.A voltage of 15V is required for its operation.There is an interface IC called BUFFER OR INVERTER BASED PERIPHERAL DRIVER that is employed in this device.In the maximum case, the output current can be 2.3A volts.A boot strap voltage of 600V is the maximum possible high-side voltage.Mosfet gate drivers can deliver a current of 1.9A.Considering its maximum power dissipation, 1W shows its maximum capacity to transfer and conduct power loss without overheating.For higher stability, the supply current should be kept at 240μA.In this case, it outputs 10V voltage.
IRS21814STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS21814STRPBF Applications
There are a lot of Infineon Technologies IRS21814STRPBF gate drivers applications.
- Isolated Gate Driver Supplies
- General Purpose 3-Phase Inverter
- Portable Navigation Devices
- High-voltage isolated DC-DC converters
- High frequency line drivers
- Multicolor LED/laser displays
- White Goods - Air Conditioner, Washing Machine,
- 3-Phase Motor Inverter Driver
- Power factor correction (PFC) circuits
- Solar inverters
