IRS2181PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2181PBF |
| Output Voltage | 620V |
| Max Output Current | 2.3A |
| Power Supplies | 15V |
| Nominal Supply Current | 240μA |
| Power Dissipation | 1W |
| Output Current | 1.9A |
| Max Supply Current | 240μA |
| Propagation Delay | 330 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Max Output Voltage | 20V |
| Rise Time | 60ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 40ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.9A 2.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.33 μs |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2181PBF Overview
Its 8-DIP (0.300, 7.62mm) package provides greater flexibility.Tube is the form of the package.This configuration includes 2 drivers.Through Hole is mounted in the way.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~20V supply voltage.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.This device can operate at temperatures up to -40°C~150°C TJ.Non-Inverting is used as the input type.It's configured with 8 terminations.The base part number IRS2181PBF refers to a number of related parts.Mounting the device requires Through Hole.As a result, it is configured with 8 pins when it is designed.In order to operate, a voltage of 15V has to be applied.The interface chip of the system is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.There is a maximum output current of 2.3A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.Maximum (Bootstrap) voltage can be up to 600V.The output current can be set to 1.9A.Having the maximum power dissipation of 1W indicates its maximum capacity to conduct power losses without overheating.Mosfet gate drivers is recommended that you keep the supply current at 240μA in order to achieve greater stabilMosfet gate driversy.With its 15V power supply, it provides power for diverse applications.In this case, the voltage output is 620V.At maximum output voltage, 20V should be used.
IRS2181PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS2181PBF Applications
There are a lot of Infineon Technologies IRS2181PBF gate drivers applications.
- Motor controllers
- A/D drivers
- Line drivers
- Uninterruptible Power Supplies (UPS)
- Isolated Supplies for controller area network (CAN),
- 3-Phase Motor Inverter Driver
- UPS systems
- Industrial motor drives - compact, standard, premium, servo drives
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated switch mode power supplies (SMPS)
