IRS2183SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS2183SPBF |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 20V |
| Max Output Current | 2.3A |
| Power Supplies | 15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 625mW |
| Output Current | 1.9A |
| Max Supply Current | 1.6mA |
| Propagation Delay | 330 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 180 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 220 ns |
| Release Time | 220 ns |
| Rise / Fall Time (Typ) | 40ns 20ns |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 1.9A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.9A 2.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.33 μs |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2183SPBF Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.A packaging method of Tube is indicated.Its recommended mounting way is Surface Mount.In the absence of a 10V~20V supply voltage, it can demonstrate its superiority.The gate type on this device is IGBT, N-Channel MOSFET.Temperature range -40°C~150°C TJ is allowed for this device.The input type for this program is Inverting, Non-Inverting.Its configuration is based on a total of 8 terminations.The base part number IRS2183SPBF refers to a number of related parts.Surface Mount is the way it takes to mount the device.The pins are configured with 8 when designing the chip.With a supply voltage of 15V, it is designed to operate.Mosfet driver is possible for the output current to be as low as 2.3A.This subcategory of MOSFET Drivers has a number of useful electronic components.Ideally, the high-side voltage should not exceed 600V.The basis of the model has 2 outputs integrated.An output current of 1.9A is supported.Considering its maximum power dissipation, 625mW shows its maximum capacity to transfer and conduct power loss without overheating.The supply current should be kept at 1.6mA to ensure higher stability.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.As a result, a voltage of 20V is produced.
IRS2183SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2183SPBF Applications
There are a lot of Infineon Technologies IRS2183SPBF gate drivers applications.
- Isolated Supplies for Motor Control
- A/D drivers
- Automotive Applications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Smart Phones
- Telecom switch mode power supplies
- Active filtering
- Portable Media Players
- Dual-Battery Systems
- Solar power supplies
