IRS2183STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2183SPBF |
| Output Voltage | 10V |
| Max Output Current | 2.3A |
| Power Supplies | 15V |
| Operating Supply Current | 1.6mA |
| Power Dissipation | 625mW |
| Output Current | 1.9A |
| Max Supply Current | 1.6mA |
| Propagation Delay | 330 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 180 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 220 ns |
| Rise / Fall Time (Typ) | 40ns 20ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 1.9A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.9A 2.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.33 μs |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2183STRPBF Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the form of the package.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Surface Mount is mounted in the way of the device.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.There is a gate type of IGBT, N-Channel MOSFET in this design.This device can operate at temperatures up to -40°C~150°C TJ.Input type of Inverting, Non-Inverting is used.There are 8 terminations to form the base of its configuration.The base part number IRS2183SPBF refers to a number of related parts.Devices are mounted by Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is designed specifically to run on 15V volts of power.In the maximum case, the output current can be 2.3A volts.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.Ideally, the high-side voltage should not exceed 600V.Mosfet gate drivers supports a current output of 1.9A.Considering its maximum power dissipation, 625mW shows its maximum capacity to transfer and conduct power loss without overheating.The supply current should be kept at 1.6mA to ensure higher stability.Due to its power supplies of 15V, it solves the power supply problem for a wide range of applications.A voltage of 10V is output by this device.With a supply voltage of 1.6mA, it operates.
IRS2183STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2183STRPBF Applications
There are a lot of Infineon Technologies IRS2183STRPBF gate drivers applications.
- Line drivers
- A/D drivers
- Multicolor LED/laser displays
- Isolated switch mode power supplies (SMPS)
- Portable Media Players
- DC-DC Converters
- High power buffers
- Digitally controlled power supplies
- High frequency line drivers
- Solar inverters
