IRS2184SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2184SPBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 2.3A |
| Power Supplies | 15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 625mW |
| Output Current | 1.9A |
| Max Supply Current | 1.6mA |
| Propagation Delay | 900 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 40 ns |
| Release Time | 270 ns |
| Rise / Fall Time (Typ) | 40ns 20ns |
| Channel Type | Synchronous |
| Turn On Time | 0.9 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.9A 2.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.4 μs |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2184SPBF Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tube.Its recommended mounting way is Surface Mount.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.This device is designed with a IGBT, N-Channel MOSFET gate type.Temperature range -40°C~150°C TJ is allowed for this device.The input type for this program is Non-Inverting.Its configuration starts with 8 terminations.Under its base part number IRS2184SPBF, various related parts can be found.Mosfet driver is mounted using the Surface Mount method.In the device, there are 8 pins.A supply voltage of 15V is required for operation.There is an output current limit of 2.3A for this device.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.Ideally, the high-side voltage should not exceed 600V.The basis of the model has 2 outputs integrated.Mosfet driver supports an output current of 1.9A.According to its maximum power dissipation, 625mW is capable of conducting and transferring a large amount of power without overheating.For higher stability, the supply current should be kept at 1.6mA.The power supply 15V of the product solves the power supply problem for a variety of applications.In this case, the voltage is 620V.
IRS2184SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2184SPBF Applications
There are a lot of Infineon Technologies IRS2184SPBF gate drivers applications.
- Power factor correction (PFC) circuits
- Isolated Supplies for controller area network (CAN),
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Video amplifiers
- Head-up and Head mounted displays
- Welding
- Commercial air-conditioning (CAC)
- Smart Phones
- Motor Controls
- Active Clamp Flyback or Forward and Synchronous Rectifier
