IRS21850SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS21850SPBF |
| Output Voltage | 60mV |
| Max Output Current | 4A |
| Nominal Supply Current | 150μA |
| Power Dissipation | 1.25W |
| Output Current | 4A |
| Propagation Delay | 210 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 160 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Turn-Off Delay Time | 160 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IRS21850SPBF Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Gate drivers is packaged in the way of Tube.A total of 1 drivers are integrated into its configuration.It's mounted on the way to Surface Mount.When the supply voltage is 10V~20V it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET is designed for it.This device allows temperatures in the range of -55°C~150°C TJ.The input type for this program is Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.There are numerous related parts listed under its base part number IRS21850SPBF.The device is mounted using Surface Mount.As a result, it is configured with 8 pins when it is designed.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.There is a maximum output current of 4A.Ideally, the high-side voltage should not exceed 600V.An output current of 4A is supported.Considering its maximum power dissipation, 1.25W shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers outputs 60mV as voltage.
IRS21850SPBF Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.25W
IRS21850SPBF Applications
There are a lot of Infineon Technologies IRS21850SPBF gate drivers applications.
- DC-DC Converters
- AC-DC Inverters
- Telecom switch mode power supplies
- Portable Media Players
- High-speed communications
- Power factor correction (PFC) circuits
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Gate Driver Supplies
- White Goods - Air Conditioner, Washing Machine,
- Dual-Battery Systems
