IRS2186PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2186PBF |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Power Supplies | 15V |
| Nominal Supply Current | 240μA |
| Power Dissipation | 1W |
| Output Current | 4A |
| Max Supply Current | 240μA |
| Propagation Delay | 250 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 170 ns |
| Rise Time | 38ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 170 ns |
| Rise / Fall Time (Typ) | 22ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2186PBF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Gate drivers is packaged in the way of Tube.Its recommended mounting way is Through Hole.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.There is a gate type of IGBT, N-Channel MOSFET in this design.Temperature range -40°C~150°C TJ is allowed for this device.A type of Non-Inverting is used for input in this program.As a result of its configuration, it contains a maximum of 8 terminations.Under its base part number IRS2186PBF, various related parts can be found.Devices are mounted by Through Hole.When designing, the device is configured with 8 pins.A voltage of 15V is required for its operation.The interface IC is referred to as BUFFER OR INVERTER BASED PERIPHERAL DRIVER.There is a maximum output current of 4A that can be achieved.Within this subcategory of MOSFET Drivers, there are several useful electronic components.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.For its basis, there are 2 outputs integrated.This device supports a current output of 4A at the output.The maximum power dissipation of 1W shows its maximum capability to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 240μA to ensure greater stabilMosfet gate driversy.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.
IRS2186PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS2186PBF Applications
There are a lot of Infineon Technologies IRS2186PBF gate drivers applications.
- PCMCIA applications
- Welding
- Motor Drives
- High-voltage isolated DC-DC converters
- Digitally controlled power supplies
- A/D drivers
- Automotive Applications
- High current laser/LED systems
- High frequency line drivers
- Refrigerator
