IRS2186STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2186SPBF |
| Max Output Current | 4A |
| Power Supplies | 15V |
| Nominal Supply Current | 240μA |
| Power Dissipation | 625mW |
| Output Current | 4A |
| Max Supply Current | 240μA |
| Propagation Delay | 250 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 170 ns |
| Rise Time | 38ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 170 ns |
| Rise / Fall Time (Typ) | 22ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2186STRPBF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Cut Tape (CT) is indicated.The configuration is supported by 2 drivers.There is a mounting bracket in the way of Surface Mount.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel MOSFET.For this device, the temperature range is -40°C~150°C TJ.The input type for this program is Non-Inverting.There are 8 terminations to form the base of its configuration.Under its base part number IRS2186SPBF, various related parts can be found.The device is mounted using Surface Mount.At the time of design, it is configured with 8 pins.This device operates with 15V supply voltage.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED PERIPHERAL DRIVER.As a maximum, there is 4A limit to the output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Maximum (Bootstrap) voltage is 600V.Mosfet driver supports an output current of 4A.Based on its maximum power dissipation of 625mW, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 240μA in order to achieve greater stabilMosfet gate driversy.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.
IRS2186STRPBF Features
Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2186STRPBF Applications
There are a lot of Infineon Technologies IRS2186STRPBF gate drivers applications.
Smart Phones
Refrigerator
Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
Portable computers
High power buffers
Dual-Battery Systems
High frequency line drivers
UPS systems
Motor Drives
A/D drivers
