IRS2302STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Voltage - Supply | 5V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRS2302SPBF |
| Max Output Current | 350mA |
| Power Supplies | 15V |
| Power Dissipation | 625mW |
| Output Current | 200mA |
| Propagation Delay | 850 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 50 ns |
| Rise / Fall Time (Typ) | 130ns 50ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.95 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2302STRPBF Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Tape & Reel (TR) represents the packaging method.The configuration is supported by 2 drivers.Its recommended mounting way is Surface Mount.In the absence of a 5V~20V supply voltage, its superiority can be demonstrated.IGBT, N-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Input type of Non-Inverting is used.Initially, the configuration is composed of 8 terminations.There are numerous related parts listed under its base part number IRS2302SPBF.Mosfet driver is mounted using Surface Mount.During design, it is configured with 8 pins.A supply voltage of 15V is required for operation.The maximum output current can amount to 350mA.Several electronic components are included in its subcategory of MOSFET Drivers.A high-side voltage can be set up to 600V (Bootstrap).The device is capable of delivering a current of 200mA.Its maximum power dissipation of 625mW also demonstrates its maximum ability to transfer power without overheating.With its 15V power supply, it provides power for diverse applications.
IRS2302STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2302STRPBF Applications
There are a lot of Infineon Technologies IRS2302STRPBF gate drivers applications.
- Dual-Battery Systems
- serial peripheral interface (SPI), I2C
- High frequency line drivers
- DC-DC Converters
- Solar power supplies
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated Supplies for controller area network (CAN),
- Portable Media Players
- Line drivers
- Motor Controls
