IRS2304PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IRS2304PBF |
| Number of Outputs | 2 |
| Output Voltage | 620V |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Nominal Supply Current | 240μA |
| Power Dissipation | 1W |
| Output Current | 130mA |
| Max Supply Current | 240μA |
| Propagation Delay | 210 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 150 ns |
| Rise Time | 120ns |
| Fall Time (Typ) | 50 ns |
| Turn-Off Delay Time | 150 ns |
| Release Time | 140 ns |
| Rise / Fall Time (Typ) | 70ns 35ns |
| Channel Type | Independent |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.7V 2.3V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2304PBF Overview
Its 8-DIP (0.300, 7.62mm) package is adopted for higher flexibility.Gate drivers is packaged in the way of Tube.Through Hole is mounted in the way.Using a 10V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Non-Inverting is used as the input type in this program.As a result of its configuration, it contains a maximum of 8 terminations.There are numerous related parts listed under its base part number IRS2304PBF.Mosfet driver is mounted using the Through Hole method.During design, it is configured with 8 pins.In order to operate, a voltage of 15V has to be applied.An output current as high as 600mA can be achieved at maximum power.Several electronic components are included in its subcategory of MOSFET Drivers.The high-side voltage - Max (Bootstrap) can be up to 600V.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.The output current of this device can be set to 130mA.This device has a maximum power dissipation of 1W, indicating that it is capable of reducing power loss without overheating.For higher stability, the supply current should be kept at 240μA.Due to its power supplies of 15V, it solves the power supply problem for a wide range of applications.620V is the output voltage.
IRS2304PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IRS2304PBF Applications
There are a lot of Infineon Technologies IRS2304PBF gate drivers applications.
- Welding
- DC-DC Converters
- High power buffers
- Isolated Supplies for controller area network (CAN),
- Topologies
- High frequency line drivers
- Broadcast equipment
- Refrigerator
- Portable Media Players
- High-voltage isolated DC-DC converters
