IRS2330DJTRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead), 32 Leads |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2W |
| Voltage - Supply | 10V~20V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS2330DJPBF |
| Qualification Status | Not Qualified |
| Output Voltage | 20V |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 2W |
| Output Current | 200mA |
| Propagation Delay | 700 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 80ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 700 ns |
| Rise / Fall Time (Typ) | 80ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.7 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.7 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.572mm |
| Length | 16.6624mm |
| Width | 16.6624mm |
| RoHS Status | RoHS Compliant |
IRS2330DJTRPBF Overview
Its 44-LCC (J-Lead), 32 Leads package provides greater flexibility.Tape & Reel (TR) is the packaging method.6 drivers are incorporated for its configuration.There is a mounting bracket in the way of Surface Mount.In the absence of a power supply voltage of 10V~20V V, it is able to demonstrate its superiority.The gate type on this device is IGBT, N-Channel MOSFET.This device can operate at temperatures up to -40°C~150°C TJ.Mosfet driver accepts input of type Inverting.Its configuration starts with 44 terminations.The base part number IRS2330DJPBF refers to a number of related parts.Mounting the device requires Surface Mount.When designing, the device is configured with 44 pins.The device is specifically designed to operate at 15V volts.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 500mA for this device.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A high-side voltage can be set up to 600V (Bootstrap).Mosfet gate drivers can deliver a current of 200mA.Based on its maximum power dissipation of 2W, it is clear that it is capable of transferring and conducting power loss without overheating.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.A voltage of 20V is output by this device.Mosfet gate drivers operates wMosfet gate driversh a resistance of 75Ohm.
IRS2330DJTRPBF Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 2W
Resistance of 75Ohm
IRS2330DJTRPBF Applications
There are a lot of Infineon Technologies IRS2330DJTRPBF gate drivers applications.
- serial peripheral interface (SPI), I2C
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Broadcast equipment
- Active filtering
- High current laser/LED systems
- 3-Phase Motor Inverter Driver
- RGB applications
- Portable computers
- Isolated switch mode power supplies (SMPS)
- DC-DC Converters
