IRS2332DJPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead), 32 Leads |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2W |
| Voltage - Supply | 10V~20V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS2332DJPBF |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 620V |
| Max Output Current | 500mA |
| Power Dissipation | 2W |
| Output Current | 200mA |
| Propagation Delay | 700 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 125ns |
| Fall Time (Typ) | 55 ns |
| Turn-Off Delay Time | 500 ns |
| Rise / Fall Time (Typ) | 80ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.7 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.7 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 3.59mm |
| Length | 16.66mm |
| Width | 16.66mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
IRS2332DJPBF Overview
For greater flexibility, its 44-LCC (J-Lead), 32 Leads package is used.A packaging method of Tube is used.The configuration is supported by 6 drivers.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 10V~20V.IGBT, N-Channel MOSFET is the gate type used for this design.This device allows temperatures in the range of -40°C~150°C TJ.Mosfet driver accepts input of type Inverting.Its configuration starts with 44 terminations.The base part number IRS2332DJPBF refers to a number of related parts.Mounting the device requires Surface Mount.Mosfet driver is configured wMosfet driverh 44 pins when designing.A supply voltage of 15V is required for operation.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.An output current as high as 500mA can be achieved at maximum power.This subcategory of MOSFET Drivers has a number of useful electronic components.High-side voltage - Max (Bootstrap) can be as low as 600V.In terms of its basis, there are 1 outputs integrated.Mosfet gate drivers can deliver a current of 200mA.Using 2W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.The voltage it outputs is 620V.As far as the resistance is concerned, it works with a resistance of 75Ohm.
IRS2332DJPBF Features
Embedded in the Tube package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 2W
Resistance of 75Ohm
IRS2332DJPBF Applications
There are a lot of Infineon Technologies IRS2332DJPBF gate drivers applications.
- Industrial motor drives - compact, standard, premium, servo drives
- General Purpose 3-Phase Inverter
- High-speed communications
- Digitally controlled power supplies
- LCD/LCoS/DLP portable and embedded pico projectors
- Welding
- Head-up and Head mounted displays
- Motor Control
- UPS systems
- 3-Phase Motor Inverter Driver
