IRS2332DJTRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead), 32 Leads |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2W |
| Voltage - Supply | 10V~20V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS2332DJPBF |
| Qualification Status | Not Qualified |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Power Dissipation | 2W |
| Output Current | 200mA |
| Propagation Delay | 700 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 125ns |
| Fall Time (Typ) | 55 ns |
| Turn-Off Delay Time | 500 ns |
| Rise / Fall Time (Typ) | 80ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.7 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.7 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.572mm |
| Length | 16.6624mm |
| Width | 16.6624mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IRS2332DJTRPBF Overview
For greater flexibility, the 44-LCC (J-Lead), 32 Leads package is adopted.Tape & Reel (TR) is the form of the package.There are 6 drivers installed for this device.Surface Mount is mounted in the way.WGate driversh a 10V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type IGBT, N-Channel MOSFET is designed for it.This device allows temperatures in the range of -40°C~150°C TJ.Inverting is used as the input type in this program.44 terminations constitute its foundation.There are various parts that can be found under its base part number IRS2332DJPBF.The mount method is Surface Mount.As a result, it is configured with 44 pins when it is designed.The device is specifically designed to function with a supply voltage of 15V V.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 500mA for this device.There are several useful electronic components in this subcategory of MOSFET Drivers.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 600V.The device is capable of delivering a current of 200mA.Based on its maximum power dissipation of 2W, it is clear that it is capable of transferring and conducting power loss without overheating.Due to its power supplies of 15V, it solves the power supply problem for a wide range of applications.Device operation requires a resistance of 75Ohm.
IRS2332DJTRPBF Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 2W
Resistance of 75Ohm
IRS2332DJTRPBF Applications
There are a lot of Infineon Technologies IRS2332DJTRPBF gate drivers applications.
- Power factor correction (PFC) circuits
- Commercial and agricultural vehicles (CAV)
- Industrial Modules
- Welding
- A/D drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Digitally controlled power supplies
- Motor Control
- Solar power supplies
- AC-DC Inverters
