IRS2332DSPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.6W |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS2332DSPBF |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 620V |
| Max Output Current | 500mA |
| Nominal Supply Current | 4mA |
| Power Dissipation | 1.6W |
| Output Current | 200mA |
| Propagation Delay | 700 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 80ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 500 ns |
| Rise / Fall Time (Typ) | 80ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.7 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.7 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
IRS2332DSPBF Overview
In order to increase flexibility, the package 28-SOIC (0.295, 7.50mm Width) is used.Tube represents the packaging method.The configuration is supported by 6 drivers.Surface Mount is the way in which it is mounted.When the supply voltage is 10V~20V it is able to demonstrate its superiority.IGBT, N-Channel MOSFET is the gate type used for this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.This program uses the input type of Inverting.As a result of its configuration, it contains a maximum of 28 terminations.There are various related parts under its base part number IRS2332DSPBF.In this case, Surface Mount indicates how the device is mounted.When designing, the device is configured with 28 pins.Mosfet driver is designed specifically to run on 15V volts of power.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 500mA.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.Based on its basis, it integrates 1 outputs.Mosfet driver supports an output current of 200mA.Its maximum power dissipation of 1.6W also demonstrates its maximum ability to transfer power without overheating.In this case, the voltage is 620V.
IRS2332DSPBF Features
Embedded in the Tube package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.6W
IRS2332DSPBF Applications
There are a lot of Infineon Technologies IRS2332DSPBF gate drivers applications.
- Topologies
- Motor controllers
- Solar inverters
- Broadcast equipment
- Power factor correction (PFC) circuits
- Portable computers
- Motor Controls
- PCMCIA applications
- Isolated switch mode power supplies (SMPS)
- Video amplifiers
