IRS2332JTRPBF
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead), 32 Leads |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Resistance | 75Ohm |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2W |
| Voltage - Supply | 10V~20V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | IRS2332JPBF |
| Qualification Status | Not Qualified |
| Max Output Current | 500mA |
| Power Supplies | 15V |
| Power Dissipation | 2W |
| Output Current | 200mA |
| Propagation Delay | 700 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 125ns |
| Fall Time (Typ) | 55 ns |
| Turn-Off Delay Time | 500 ns |
| Rise / Fall Time (Typ) | 80ns 35ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.572mm |
| Length | 16.6624mm |
| Width | 16.6624mm |
IRS2332JTRPBF Overview
There is greater flexibility with the 44-LCC (J-Lead), 32 Leads package.Tape & Reel (TR) represents the packaging method.Gate drivers is configured wGate driversh 6 drivers.Surface Mount is mounted in the way.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 10V~20V supply voltage.A gate type of IGBT, N-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~150°C TJ.Inverting is the input type used in this program.Initially, the configuration is composed of 44 terminations.Numerous related parts are available for its base part number IRS2332JPBF.Mosfet driver is mounted using the Surface Mount method.During design, it is configured with 44 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.Mosfet driver is possible for the output current to be as low as 500mA.There are various useful electronic components in its subcategory MOSFET Drivers.Ideally, the high-side voltage should not exceed 600V.The output current supported by the device is 200mA.2W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Due to its power supplies of 15V, it solves the power supply problem for a wide range of applications.As far as the resistance is concerned, it works with a resistance of 75Ohm.
IRS2332JTRPBF Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 2W
Resistance of 75Ohm
IRS2332JTRPBF Applications
There are a lot of Infineon Technologies IRS2332JTRPBF gate drivers applications.
- Line drivers
- Commercial air-conditioning (CAC)
- Industrial Modules
- Motor Drives
- Power factor correction (PFC) circuits
- Motor Controls
- Topologies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Multicolor LED/laser displays
- Video amplifiers
