Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-VFQFN Exposed Pad |
Number of Pins |
28 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
1996 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
HTS Code |
8542.39.00.01 |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
3.363W |
Voltage - Supply |
10V~20V |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.4mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
IRS2334MPBF |
Qualification Status |
Not Qualified |
Max Output Current |
200mA |
Power Supplies |
15V |
Nominal Supply Current |
200mA |
Output Current |
200mA |
Propagation Delay |
750 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
750 ns |
Rise Time |
125ns |
Fall Time (Typ) |
50 ns |
Turn-Off Delay Time |
750 ns |
Rise / Fall Time (Typ) |
125ns 50ns |
Channel Type |
3-Phase |
Number of Drivers |
6 |
Turn On Time |
0.75 μs |
Driven Configuration |
Half-Bridge |
Gate Type |
IGBT, N-Channel MOSFET |
Current - Peak Output (Source, Sink) |
200mA 350mA |
Logic Voltage - VIL, VIH |
0.8V 2.5V |
Turn Off Time |
0.75 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
High Side Voltage - Max (Bootstrap) |
600V |
Height Seated (Max) |
1mm |
Length |
5mm |
Width |
5mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
IRS2334MTRPBF Overview
The 28-VFQFN Exposed Pad package offers greater flexibility.Gate drivers is package in Tape & Reel (TR) case.This configuration includes 6 drivers.Its recommended mounting way is Surface Mount.When the supply voltage is 10V~20V it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Input type of Non-Inverting is used.There are 28 terminations to form the base of its configuration.Numerous related parts can be found under its base part number IRS2334MPBF.The mount method is Surface Mount.During design, it is configured with 28 pins.In order to operate, a voltage of 15V has to be applied.There is an output current limit of 200mA for this device.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Ideally, the high-side voltage should not exceed 600V.The device is capable of delivering a current of 200mA.Based on the maximum power dissipation of 3.363W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Due to its 15V power supply, it can solve power supply problems for an array of diverse applications.
IRS2334MTRPBF Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 3.363W
IRS2334MTRPBF Applications
There are a lot of Infineon Technologies IRS2334MTRPBF gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Dual-Battery Systems
- Pulse transformer drivers
- RGB applications
- 3-Phase Motor Inverter Driver
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High power buffers
- A/D drivers
- Solar power supplies
- Isolated Supplies for controller area network (CAN),