IRS2336DSPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 1.6W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | IRS2336DSPBF |
| Output Voltage | 620V |
| Max Output Current | 350mA |
| Nominal Supply Current | 120μA |
| Power Dissipation | 1.6W |
| Output Current | 200mA |
| Propagation Delay | 750 ns |
| Input Type | Inverting |
| Turn On Delay Time | 125 ns |
| Rise Time | 190ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 50 ns |
| Output Polarity | INVERTED |
| Release Time | 530 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 125ns 50ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.75 μs |
| Output Peak Current Limit-Nom | 0.35A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.75 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 2.35mm |
| Length | 18.0848mm |
| Width | 7.5946mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS2336DSPBF Overview
The 28-SOIC (0.295, 7.50mm Width) package offers greater flexibility.A package of Tube has been used.There are 6 drivers installed for this device.In the direction of Surface Mount, gate drivers is mounted.Using a 10V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.A gate type of IGBT, N-Channel MOSFET has been used in its design.-40°C~150°C TJ is the allowed temperature range for this device.Inverting is the input type used in this program.The configuration is based on 28 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IRS2336DSPBF.Mosfet driver is mounted using Surface Mount.The pins are configured with 28 when designing the chip.The device is specifically designed to function with a supply voltage of 15V V.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 350mA that can be achieved.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.This device supports a current output of 200mA at the output.1.6W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.In this case, the voltage is 620V.STANDARD is its input.For this device to function, a resistance value of 100Ohm is required.
IRS2336DSPBF Features
Embedded in the Tube package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.6W
Resistance of 100Ohm
IRS2336DSPBF Applications
There are a lot of Infineon Technologies IRS2336DSPBF gate drivers applications.
- Automotive Applications
- High-voltage isolated DC-DC converters
- Commercial and agricultural vehicles (CAV)
- Telecom switch mode power supplies
- High-speed communications
- Line drivers
- Topologies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- RGB applications
- Motor controllers
