IRS25091SPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS25091SPBF |
| Qualification Status | Not Qualified |
| Max Output Current | 200mA |
| Power Supplies | 15V |
| Power Dissipation | 625mW |
| Output Current | 200mA |
| Propagation Delay | 1.1 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 250 ns |
| Rise / Fall Time (Typ) | 150ns 50ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.4 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IRS25091SPBF Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Gate drivers is package in Tube case.The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.A supply voltage of 10V~20V demonstrates its superiority.There is a gate type of IGBT, N-Channel MOSFET in this design.For this device, the temperature range is -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.8 terminations constitute its foundation.Many related parts can be found under its base part number IRS25091SPBF.Surface Mount is the way it takes to mount the device.At the time of design, it is configured with 8 pins.The device is specifically designed to function with a supply voltage of 15V V.There is a maximum output current of 200mA that can be achieved.There are several useful electronic components in this subcategory of MOSFET Drivers.There can be a voltage up to 600V on the high-side (Bootstrap).Mosfet gate drivers supports a current output of 200mA.The maximum power dissipation of 625mW shows its maximum capability to transfer and conduct power loss without overheating.With its power supplies of 15V, it solves the power supply problems for diverse applications.
IRS25091SPBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS25091SPBF Applications
There are a lot of Infineon Technologies IRS25091SPBF gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Motor Controls
- Motor Control
- 3-Phase Motor Inverter Driver
- Isolated Gate Driver Supplies
- Commercial air-conditioning (CAC)
- Commercial and agricultural vehicles (CAV)
- UPS systems
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Industrial Modules
