IRS2509SPBF
| Parameters | |
|---|---|
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 625mW |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS2509SPBF |
| Output Voltage | 20V |
| Max Output Current | 200mA |
| Nominal Supply Current | 2mA |
| Output Current | 200mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 150ns |
| Fall Time (Typ) | 50 ns |
| Turn-Off Delay Time | 250 ns |
| Rise / Fall Time (Typ) | 150ns 50ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 1.1 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.4 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
IRS2509SPBF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is used.Configuration is supported by 2 drivers.Its recommended mounting way is Surface Mount.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET has been used in its design.This device can operate at temperatures up to -40°C~150°C TJ.Non-Inverting is used as the input type.There are 8 terminations to form the base of its configuration.You will find various related parts under the base part number IRS2509SPBF.The device is mounted with Surface Mount.A total of 8 pins are available on the device.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.The maximum output current can amount to 200mA.Ideally, the high-side voltage should not exceed 600V.200mA is the maximum output current supported by the device.According to its maximum power dissipation, 625mW is capable of conducting and transferring a large amount of power without overheating.In this case, the voltage output is 20V.
IRS2509SPBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2509SPBF Applications
There are a lot of Infineon Technologies IRS2509SPBF gate drivers applications.
- Video amplifiers
- Industrial Motor Inverter - Power Tools, Robotics
- Commercial air-conditioning (CAC)
- High current laser/LED systems
- High-voltage isolated DC-DC converters
- 3-Phase Motor Inverter Driver
- Commercial and agricultural vehicles (CAV)
- Isolated Supplies for Motor Control
- Motor Drives
- Isolated Supplies for controller area network (CAN),
