IRS2509STRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 625mW |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS2509SPBF |
| Output Voltage | 20V |
| Max Output Current | 350mA |
| Nominal Supply Current | 2mA |
| Output Current | 200mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 750 ns |
| Rise Time | 150ns |
| Fall Time (Typ) | 50 ns |
| Turn-Off Delay Time | 250 ns |
| Rise / Fall Time (Typ) | 150ns 50ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 1.1 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.4 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
IRS2509STRPBF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is used.Configuration is supported by 2 drivers.Gate drivers is mounted in the way of Surface Mount.WGate driversh a 10V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.The gate type on this device is IGBT, N-Channel MOSFET.For this device, the temperature range is -40°C~150°C TJ.Non-Inverting is used as the input type.As a result of its configuration, it contains a maximum of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IRS2509SPBF.The device is mounted using Surface Mount.As a result, it is configured with 8 pins when it is designed.A supply voltage of 15V is required for operation.As a maximum, there is 350mA limit to the output current.A boot strap voltage of 600V is the maximum possible high-side voltage.The output current of this device can be set to 200mA.Based on its maximum power dissipation of 625mW, it is clear that it is capable of transferring and conducting power loss without overheating.In this case, it produces a voltage of 20V.
IRS2509STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IRS2509STRPBF Applications
There are a lot of Infineon Technologies IRS2509STRPBF gate drivers applications.
- Welding
- Uninterruptible Power Supplies (UPS)
- High-voltage isolated DC-DC converters
- Solar power supplies
- DC/DC converters
- High frequency line drivers
- serial peripheral interface (SPI), I2C
- Motor controllers
- Portable computers
- Motor Control
