IRS25401PBF
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.260, 6.60mm) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRS25401PBF |
| Number of Outputs | 1 |
| Output Voltage | 16.6V |
| Operating Supply Voltage | 14V |
| Input Voltage-Nom | 14V |
| Number of Channels | 2 |
| Max Supply Voltage | 14.25V |
| Min Supply Voltage | 13.75V |
| Nominal Supply Current | 10mA |
| Power Dissipation | 1W |
| Output Current | 700mA |
| Max Supply Current | 2mA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 27.6V |
| Control Technique | HYSTERETIC CURRENT MODE |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Dimming | PWM |
| Switching Frequency | 500kHz |
| Height | 5.33mm |
| Length | 10.92mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
IRS25401PBF Overview
There is a 8-DIP (0.260, 6.60mm) package on the board that is used to save space. A LED driver using this design has 1 outputs.Through Hole is used for mounting.DC DC Controller emerges with high efficiency and reliability.This LED driver can be operated at a temperature of -25°C~150°C TJ. The operation of this system is supported by 8 terminations.Its configuration is based on 8 pins.It's mounted by Through Hole.The base part number for this LED driver is IRS25401PBF.It is acceptable to have a maximum voltage of 14.25V.It operates at a voltage of 8V as its minimal input voltage.With a minimal supply voltage of 13.75V, it reaches the highest efficiency levels.The allowable maximum value of supply current reaches 27.6V.If the maximum current supply is less than 2mA, this device provides high efficiency.700mA is the maximum amount of current that can be supplied to the load.Systems require 14V voltage to operate.The electronic component can fully perform its functions if the switching frequency is maintained at 500kHz.This device produces a voltage of 16.6V as its output.Device operation requires 14V volts from the circuit.A total of 2 transmission channels are available.
IRS25401PBF Features
Available in the 8-DIP (0.260, 6.60mm) package
Operating temperature of -25°C~150°C TJ
Operating with the supply voltage of 14V
Switching frequency of 500kHz
Output voltage of 16.6V
IRS25401PBF Applications
There are a lot of Infineon Technologies IRS25401PBF LED Driver ICs applications.
- Refrigeration lighting
- Replacement lamps
- LED backlight driver for LCD displays for portable equipment
- Dimmable LED for vehicle interiors
- Linear fluorescent
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- High-end retail lighting
- Flicker-free LED Lighting using R1580N
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lightings for Inspection Devices
