IRS2541STRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | MATTE TIN OVER NICKEL |
| Additional Feature | SINGLE SWITCHING CONFIGURATION ALSO POSSIBLE |
| Max Power Dissipation | 625mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRS2541SPBF |
| Number of Outputs | 1 |
| Output Voltage | 16.8V |
| Input Voltage-Nom | 14V |
| Max Supply Voltage | 14.25V |
| Min Supply Voltage | 13.75V |
| Nominal Supply Current | 10mA |
| Power Dissipation | 625mW |
| Output Current | 200mA |
| Max Supply Current | 10mA |
| Quiescent Current | 1mA |
| Input Voltage (Min) | 9V |
| Topology | Step-Down (Buck) |
| Output Current per Channel | 500mA |
| Control Technique | PULSE WIDTH MODULATION |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Number of Drivers | 2 |
| Dimming | PWM |
| Switching Frequency | 500kHz |
| Voltage - Supply (Max) | 15.6V |
| Voltage - Supply (Min) | 9V |
| Length | 4.9mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IRS2541STRPBF Overview
There is a 8-SOIC (0.154, 3.90mm Width) package on the board that is used to save space. As part of the design of this LED driver, there are 1 outputs that have been used.Mounting is done according to the Surface Mount method.This emerges as a DC DC Controller with high efficiency and reliability.The led light driver can work at -25°C~150°C TJ.8 terminations are used in its operation.The configuration of the board is built around 8 pins.Undetermined failures can occur if the voltage supply is below 9V.The mount is on its way to Surface Mount.A base part number of IRS2541SPBF is associated with this LED driver.It is acceptable to have a maximum voltage of 14.25V.There is an optimization that allows a maximum supply voltage of 15.6V.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 13.75V.Whenever the supply current is lower than 10mA, it can provide high efficiency.The current that can be supplied to the load is 200mA.The electronic component can function fully when the switching frequency is maintained at 500kHz.There is no external factor that consumes current when there is 1mA current consumption.It has a voltage of 16.8V.When using the device, there is a voltage of 14V volts assigned to the circuit.The device operates much more conveniently when the input voltage exceeds or equals 9V.Additionally, this LED driver is characterized by a SINGLE SWITCHING CONFIGURATION ALSO POSSIBLE.
IRS2541STRPBF Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -25°C~150°C TJ
Switching frequency of 500kHz
Output voltage of 16.8V
SINGLE SWITCHING CONFIGURATION ALSO POSSIBLE
IRS2541STRPBF Applications
There are a lot of Infineon Technologies IRS2541STRPBF LED Driver ICs applications.
- OLED power supply for portable equipment
- LED headlights
- Stage Lighting and Signage
- LED Lightings for Inspection Devices
- White LED Backlight for portable equipment
- Down lighting
- Architectural lighting
- Panel lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
