IRS2608DSTRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 200Ohm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRS2608DSPBF |
| Qualification Status | Not Qualified |
| Max Output Current | 350mA |
| Power Supplies | 15V |
| Power Dissipation | 625mW |
| Output Current | 200mA |
| Propagation Delay | 380 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 250 ns |
| Rise / Fall Time (Typ) | 150ns 50ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.35A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| RoHS Status | RoHS Compliant |
IRS2608DSTRPBF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the packaging method.Gate drivers is configured wGate driversh 2 drivers.In the direction of Surface Mount, gate drivers is mounted.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 10V~20V.This device is designed with a IGBT, N-Channel MOSFET gate type.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.Its configuration is based on a total of 8 terminations.Under its base part number IRS2608DSPBF, various related parts can be found.You mount it with Surface Mount.At the time of design, it is configured with 8 pins.The device is specifically designed to function with a supply voltage of 15V V.There is an output current limit of 350mA for this device.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A high-side voltage can be set up to 600V (Bootstrap).This device supports a current output of 200mA at the output.The maximum power dissipation of 625mW shows its maximum capability to transfer and conduct power loss without overheating.With its power supplies of 15V, it solves the power supply problems for diverse applications.The resistance of the device is 200Ohm.
IRS2608DSTRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
Resistance of 200Ohm
IRS2608DSTRPBF Applications
There are a lot of Infineon Technologies IRS2608DSTRPBF gate drivers applications.
- High power buffers
- Motor Drives
- DC-DC Converters
- Refrigerator
- Automotive Applications
- LCD/LCoS/DLP portable and embedded pico projectors
- Commercial and agricultural vehicles (CAV)
- Broadcast equipment
- Isolated switch mode power supplies (SMPS)
- Digitally controlled power supplies
