IRS2609DSTRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 200Ohm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRS2609DSPBF |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 350mA |
| Power Dissipation | 625mW |
| Output Current | 200mA |
| Propagation Delay | 1.1 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 250 ns |
| Rise / Fall Time (Typ) | 150ns 50ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.2A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.4 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| RoHS Status | RoHS Compliant |
IRS2609DSTRPBF Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.Gate drivers is package in Tape & Reel (TR) case.This device is equipped with 2 drivers for its configuration.It's mounted on the way to Surface Mount.A supply voltage of 10V~20V demonstrates its superiority.Gate type IGBT, N-Channel MOSFET is designed for it.In this device, temperatures must not exceed -40°C~150°C TJ.The input type is Non-Inverting.Mosfet driver is based on 8 terminations.There are various related parts under its base part number IRS2609DSPBF.Mosfet driver is mounted using the Surface Mount method.When designing, the device is configured with 8 pins.Mosfet driver is designed specifically to run on 15V volts of power.An output current as high as 350mA can be achieved at maximum power.Within this subcategory of MOSFET Drivers, there are several useful electronic components.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 600V.There are 1 outputs integrated for its basis.The output current of this device can be set to 200mA.The maximum power dissipation of 625mW shows its maximum capability to transfer and conduct power loss without overheating.Resistance 200Ohm is used for operation.
IRS2609DSTRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
Resistance of 200Ohm
IRS2609DSTRPBF Applications
There are a lot of Infineon Technologies IRS2609DSTRPBF gate drivers applications.
- Isolated Gate Driver Supplies
- Motor Control
- serial peripheral interface (SPI), I2C
- Pulse transformer drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Industrial Motor Inverter - Power Tools, Robotics
- Welding
- Dual-Battery Systems
- 3-Phase Motor Inverter Driver
- Isolated Supplies for Motor Control
