IRS26310DJTRPBF
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead), 32 Leads |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2W |
| Voltage - Supply | 12V~20V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | IRS26310DJPBF |
| Max Output Current | 350mA |
| Power Supplies | 15V |
| Power Dissipation | 2W |
| Output Current | 350mA |
| Propagation Delay | 750 ns |
| Input Type | Non-Inverting |
| Rise Time | 190ns |
| Fall Time (Typ) | 75 ns |
| Rise / Fall Time (Typ) | 125ns 50ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.75 μs |
| Output Peak Current Limit-Nom | 0.2A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.75 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.572mm |
| Length | 16.6624mm |
| Width | 16.6624mm |
| Radiation Hardening | No |
IRS26310DJTRPBF Overview
For greater flexibility, the 44-LCC (J-Lead), 32 Leads package is adopted.Gate drivers is packaged in the way of Tape & Reel (TR).This device is equipped with 6 drivers for its configuration.Surface Mount is the way in which it is mounted.When the supply voltage is 12V~20V it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.It's configured with 44 terminations.There are various related parts under its base part number IRS26310DJPBF.Mounting the device requires Surface Mount.As a result, it is configured with 44 pins when it is designed.A voltage of 15V is required for its operation.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.There is a maximum output current of 350mA that can be achieved.There are several useful electronic components within its subcategory MOSFET Drivers.A high-side voltage can be set up to 600V (Bootstrap).An output current of 350mA is supported.Considering its maximum power dissipation, 2W shows its maximum capacity to transfer and conduct power loss without overheating.Due to its power supplies of 15V, it solves the power supply problem for a wide range of applications.Device operation requires a resistance of 100Ohm.
IRS26310DJTRPBF Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 2W
Resistance of 100Ohm
IRS26310DJTRPBF Applications
There are a lot of Infineon Technologies IRS26310DJTRPBF gate drivers applications.
- Motor Controls
- Portable computers
- Head-up and Head mounted displays
- UPS systems
- Active filtering
- Portable Navigation Devices
- High power buffers
- Isolated Supplies for controller area network (CAN),
- High-speed communications
- Motor Drives
