IRS2980SPBF
| Parameters | |
|---|---|
| Published | 2014 |
| Series | LEDrivIR™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Type | DC DC Controller |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 625mW |
| Frequency | 150kHz |
| Base Part Number | IRS2980SPBF |
| Number of Outputs | 1 |
| Max Supply Voltage | 16.6V |
| Nominal Supply Current | 5mA |
| Power Dissipation | 625mW |
| Output Current | 260mA |
| Max Supply Current | 20mA |
| Max Output Voltage | 16.9V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 10V |
| Max Input Voltage | 16.6V |
| Min Output Voltage | -300mV |
| Max Output Power | 625mW |
| Internal Switch(s) | No |
| High Level Output Current | 260mA |
| Low Level Output Current | 180mA |
| Dimming | Analog, PWM |
| Switching Frequency | 150kHz |
| Voltage - Supply (Max) | 16.6V |
| Voltage - Supply (Min) | 10V |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
IRS2980SPBF Overview
There is a 8-SOIC (0.154, 3.90mm Width) package on the board that is used to save space. For the design of these LED drivers, 1 outputs are used.Surface Mount represents this mounting method.As a result, it appears as a DC DC Controller with a high efficiency and a high degree of reliability.It is capable of operating at a temperature of -40°C~125°C TJ. The system operates on the basis of the frequency 150kHz.This module has 8 pins as its base.It is possible that failures will occur if the voltage supply is below 10V.It is mounted in the way of Surface Mount.The LED driver is based on part number IRS2980SPBF.It is acceptable for the supply voltage to be 16.6V.The voltage range of this device is optimized for a maximum supply voltage of 16.6V.A minimal input voltage of 10V is required for it to operate.There is 16.6V maximum value for supply current.When the maximum supply current is below 20mA, it is capable of delivering high efficiency.Operating temperatures should not exceed 125°C in order to ensure stable operation.260mA is the maximum current the load can handle.Maintaining a temperature above -55°C is essential for stabilizing operation.This electronic component can fully perform when the switching frequency is 150kHz.Several applications make use of this LED driver from the LEDrivIR? series.It is not recommended to exceed 16.9V in the output voltage.It maintains a minimum voltage of -300mV.
IRS2980SPBF Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TJ
Frequency of 150kHz
Switching frequency of 150kHz
IRS2980SPBF Applications
There are a lot of Infineon Technologies IRS2980SPBF LED Driver ICs applications.
- Gallery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lighting PFCs, Linear Dimmable
- Stage and Studio lighting
- Constant Voltage Power Source for portable equipment
- Architectural lighting
- Flicker-free LED Lighting using R1580N
- Industrial LED Lighting: Image Recognition Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
