IRS4426STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 6V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS4426 |
| Qualification Status | Not Qualified |
| Max Output Current | 3.3A |
| Power Supplies | 15V |
| Power Dissipation | 625mW |
| Output Current | 2.3A |
| Propagation Delay | 95 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 55ns |
| Fall Time (Typ) | 55 ns |
| Turn-Off Delay Time | 50 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.095 μs |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.3A 3.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.095 μs |
| Built-in Protections | TRANSIENT |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| RoHS Status | ROHS3 Compliant |
IRS4426STRPBF Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Gate drivers is packaged in the way of Tape & Reel (TR).Gate drivers is configured wGate driversh 2 drivers.There is a mounting bracket in the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 6V~20V supply voltage.A gate type of IGBT, N-Channel MOSFET is used in its design.-40°C~150°C TJ is the allowed temperature range for this device.A type of Inverting is used for input in this program.There are 8 terminations to form the base of its configuration.The base part number IRS4426 refers to a number of related parts.Mosfet driver is mounted using Surface Mount.Devices have 8 pins available.The device is specifically designed to operate at 15V volts.The interface chip of the system is HALF BRIDGE BASED PERIPHERAL DRIVER.In the maximum case, the output current can be 3.3A volts.There are several useful electronic components in this subcategory of MOSFET Drivers.Mosfet driver supports an output current of 2.3A.625mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.
IRS4426STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 625mW
IRS4426STRPBF Applications
There are a lot of Infineon Technologies IRS4426STRPBF gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Multicolor LED/laser displays
- Isolated Supplies for controller area network (CAN),
- Industrial Power Supplies
- High frequency line drivers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Industrial Modules
- Portable computers
- Video amplifiers
- AC-DC Inverters
