IRS4427PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 6V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS4427PBF |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 20V |
| Max Output Current | 2.3A |
| Power Supplies | 15V |
| Nominal Supply Current | 100μA |
| Power Dissipation | 1W |
| Output Current | 2.3A |
| Propagation Delay | 95 ns |
| Input Type | Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.095 μs |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.3A 3.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.095 μs |
| Height Seated (Max) | 5.33mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS4427PBF Overview
Its 8-DIP (0.300, 7.62mm) package is adopted for higher flexibility.Tube represents the package.In the direction of Through Hole, gate drivers is mounted.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 6V~20V.This gate type has a IGBT, N-Channel MOSFET design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Input type of Non-Inverting is used.As a result of its configuration, it contains a maximum of 8 terminations.Numerous related parts are available for its base part number IRS4427PBF.The device is mounted with Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.In order to operate, a voltage of 15V has to be applied.Mosfet driver utilizes the interface IC HALF BRIDGE BASED PERIPHERAL DRIVER.2.3A is the maximum output current.There are several useful electronic components in this subcategory of MOSFET Drivers.The basis of this model has 2 outputs integrated.This device is capable of delivering 2.3A current.According to its maximum power dissipation, 1W is capable of conducting and transferring a large amount of power without overheating.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.In this case, it outputs 20V voltage.
IRS4427PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 1W
IRS4427PBF Applications
There are a lot of Infineon Technologies IRS4427PBF gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Industrial Motor Inverter - Power Tools, Robotics
- High-speed communications
- Isolated Supplies for controller area network (CAN),
- Motor controllers
- Motor Control
- High current laser/LED systems
- Power factor correction (PFC) circuits
- General Purpose 3-Phase Inverter
- Portable Media Players
