IRS4427SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 6V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | IRS4427SPBF |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 3.3A |
| Operating Supply Voltage | 25V |
| Power Supplies | 15V |
| Nominal Supply Current | 100μA |
| Power Dissipation | 625mW |
| Output Current | 2.3A |
| Propagation Delay | 95 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 55ns |
| Fall Time (Typ) | 55 ns |
| Turn-Off Delay Time | 50 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.095 μs |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.3A 3.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.095 μs |
| Built-in Protections | TRANSIENT |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS4427SPBF Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Tube is the packaging method.There is a mounting bracket in the way of Surface Mount.A supply voltage of 6V~20V demonstrates its superiority.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.This device can operate at temperatures up to -40°C~150°C TJ.This program uses the input type of Non-Inverting.Mosfet driver is based on 8 terminations.There are various parts that can be found under its base part number IRS4427SPBF.You mount it with Surface Mount.In the device, there are 8 pins.A voltage of 15V is required for its operation.The interface IC is referred to as HALF BRIDGE BASED PERIPHERAL DRIVER.3.3A is the maximum output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.The basis of this system consists of 2 outputs.The output current of this device can be set to 2.3A.Its maximum power dissipation of 625mW shows its power loss capacity without overheating.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.Mosfet gate drivers outputs 20V as voltage.A voltage of 25V should be set for the operating supply voltage.
IRS4427SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 625mW
IRS4427SPBF Applications
There are a lot of Infineon Technologies IRS4427SPBF gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Multicolor LED/laser displays
- High-voltage isolated DC-DC converters
- Broadcast equipment
- DC-DC Converters
- Head-up and Head mounted displays
- Motor controllers
- Commercial air-conditioning (CAC)
- Isolated Supplies for controller area network (CAN),
- Industrial motor drives - compact, standard, premium, servo drives
