IRS4428STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 6V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS4428SPBF |
| Qualification Status | Not Qualified |
| Max Output Current | 3.3A |
| Power Supplies | 15V |
| Power Dissipation | 625mW |
| Output Current | 2.3A |
| Propagation Delay | 95 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 55ns |
| Fall Time (Typ) | 55 ns |
| Turn-Off Delay Time | 50 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.095 μs |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.3A 3.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.095 μs |
| Built-in Protections | TRANSIENT |
| Height | 1.5mm |
| Length | 4.98mm |
| Width | 3.99mm |
| RoHS Status | ROHS3 Compliant |
IRS4428STRPBF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tape & Reel (TR) is indicated.A total of 2 drivers are integrated into its configuration.Its recommended mounting way is Surface Mount.In the absence of a 6V~20V supply voltage, it can demonstrate its superiority.Gate type IGBT, N-Channel MOSFET is designed for it.In this device, temperatures must not exceed -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type.As a result of its configuration, it contains a maximum of 8 terminations.You will find various related parts under the base part number IRS4428SPBF.The mount method is Surface Mount.As a result, it is configured with 8 pins when it is designed.In addition, it is specifically designed to operate with a supply voltage of 15V.There is an interface IC called HALF BRIDGE BASED PERIPHERAL DRIVER that is employed in this device.In the maximum case, the output current can be 3.3A volts.There are several useful electronic components within its subcategory MOSFET Drivers.The output current supported by the device is 2.3A.Using 625mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.With its power supplies of 15V, it solves the power supply problems for diverse applications.
IRS4428STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 625mW
IRS4428STRPBF Applications
There are a lot of Infineon Technologies IRS4428STRPBF gate drivers applications.
- Motor Drives
- High current laser/LED systems
- High power buffers
- General Purpose 3-Phase Inverter
- Portable Media Players
- Uninterruptible Power Supplies (UPS)
- Motor controllers
- UPS systems
- Isolated Supplies for controller area network (CAN),
- Isolated switch mode power supplies (SMPS)
