IRSF3021
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e0 |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 155mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -55°C |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 56V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 3 |
| Qualification Status | Not Qualified |
| Max Output Current | 10A |
| Supply Voltage-Max (Vsup) | 65V |
| Supply Voltage-Min (Vsup) | 50V |
| Number of Channels | 1 |
| Output Current per Channel | 5.5A |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Turn On Time | 50 µs |
| Drain to Source Resistance | 200mOhm |
| Turn Off Time | 60 µs |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IRSF3021 Overview
In the TO-220-3 package you will find it.As of now, 1 channels are available.A Bulk-shaped package holds it.Hot-swappable device has a total of 3 terminations.SINGLE is the terminal position of the device.3 pins make up the entire device.High efficiency can be achieved by using 56V as supply voltage.This device operates by using 3 pins.Through Hole is its direction of movement.For stable operation, the maximum operating temperature should be 150°C°C.Hot-swappable device functions at a minimum working temperature of -55°C degrees Celsius in order to maintain reliabilHot-swappable devicey.For normal operation, the supply voltage (Vsup) should be kept above 50V in order to maintain a constant level of power.Vsup (maximum supply voltage) is set to 65V.In order to meet the operation criteria, the maximum output current has to be reduced to 10A.Despite its 155mOhm resistance, the device is not easily damaged.
IRSF3021 Features
The terminal position of 3
IRSF3021 Applications
There are a lot of International Rectifier IRSF3021 hot swap controllers applications.
- Microcontrollers
- Undervoltage protection
- Active current limit
- PC board hot swap insertion and removal
- Firewire
- Avionics systems
- Redundant Array of Disks (RAID)
- Disconnect faulty loads before supply voltage drops
- Loads
- Automatic restart after load failure
