IRSM836-024MA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-PowerVQFN |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| Applications | Appliance |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 16W |
| Technology | UMOS |
| Voltage - Supply | 13.5V~16.5V |
| Terminal Position | QUAD |
| Supply Voltage | 15V |
| Base Part Number | IRSM836-024 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 3 |
| Max Output Current | 2A |
| Power Supplies | 15V |
| Interface | Parallel |
| Analog IC - Other Type | AC MOTOR CONTROLLER |
| Nominal Supply Current | 125μA |
| Output Configuration | Half Bridge (3) |
| Max Supply Current | 10mA |
| Turn On Delay Time | 1.5 μs |
| Logic Function | AND |
| Turn-Off Delay Time | 1.5 μs |
| Collector Emitter Voltage (VCEO) | 250V |
| Max Collector Current | 2A |
| Voltage - Load | 200V Max |
| Number of Drivers | 6 |
| Isolation Voltage | 1.5kV |
| Switching Frequency | 20kHz |
| Motor Type - AC, DC | AC, Synchronous |
| Height | 950μm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRSM836-024MA Overview
This package was designed with Trayin mind.This part is packed in a 36-PowerVQFN case.Ideally, the part should be mounted by Surface Mount.Fits the component connected to Appliance.Drivers controllers is capable of supplying 13.5V~16.5V volts.Operation temperature ranges from -40°C~150°C TJ.There is a motor type AC, Synchronousassociated with this motor type.There are 36 terminations available on this part.The voltage can applied to the load at the rate of 200V Max.Drivers controllers is very important to keep in mind that this amplifier should be operated at 15V.The recommended mounting method is PCB, Surface Mount.An analog IC with the model number AC MOTOR CONTROLLERis employed in the device.The IRSM836-024part number is used to locate the part.36pins are used in its design.Drivers controllers belongs to Motion Control Electronics series.3outputs are available.In order to meet operation requirements, its maximum output current reaches [0].There are 6 drivers installed on this device.
IRSM836-024MA Features
Applications : Appliance
Load voltage across the chip 200V Max
base on IRSM836-024 number
designed with 3 outputs
with 6 Drivers
IRSM836-024MA Applications
There are a lot of Infineon Technologies IRSM836-024MA motor drivers applications.
- Horticultural lighting
- Infotainment backlighting
- High brightness LED lighting
- Outdoor area lights
- Lighting for the ambience of tunability
- Automotive instrumentation
- Smart lighting applications
- RGB and monochromatic LED drivers for signage and traffic signals
- Indicator
- Step-up or step-down driver topologies
