IRSM836-025MA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-PowerVQFN |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| Applications | Appliance |
| Subcategory | Motion Control Electronics |
| Technology | UMOS |
| Voltage - Supply | 13.5V~16.5V |
| Terminal Position | QUAD |
| Supply Voltage | 15V |
| Base Part Number | IRSM836-025 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Interface | Parallel |
| Analog IC - Other Type | AC MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 25W |
| Max Supply Current | 10mA |
| Turn On Delay Time | 1.5 μs |
| Logic Function | AND |
| Turn-Off Delay Time | 1.5 μs |
| Collector Emitter Voltage (VCEO) | 500V |
| Max Collector Current | 2A |
| Voltage - Load | 400V Max |
| Number of Drivers | 6 |
| Isolation Voltage | 1.5kV |
| Max Junction Temperature (Tj) | 150°C |
| Switching Frequency | 20kHz |
| Motor Type - AC, DC | AC, Synchronous |
| Height | 1mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRSM836-025MA Overview
Drivers controllers is designed with Tray package.Parts are packaged in 36-PowerVQFNcases.In general, it is recommended that the part be mounted by Surface Mount.Fits the component connected to Appliance.Drivers controllers is capable of supplying 13.5V~16.5V volts.The operating temperature ranges from -40°C~150°C TJto -40°C~150°C TJ.Drivers controllers is possible to categorize the motor type as AC, Synchronous.This part has 36termination options.At a rate of [0], voltage can be applied to the load.You should run this amplifier at 15V.There is PCB, Surface Mount recommended mounting method for this device.An analog IC with the model number AC MOTOR CONTROLLERis employed in the device.The IRSM836-025part number allows us to locate it.The device has 36 pins.The Motion Control Electronicsseries contains it.The number of outputs available is [0].In order to achieve the operation requirements, the maximal output current reaches [0].Controller ic is equipped wController ich a total of 6 drivers.
IRSM836-025MA Features
Applications : Appliance
Load voltage across the chip 400V Max
base on IRSM836-025 number
designed with 1 outputs
with 6 Drivers
IRSM836-025MA Applications
There are a lot of Infineon Technologies IRSM836-025MA motor drivers applications.
- CHMSL (center high-mount stop lamps)
- Horticultural lighting
- Dome
- Human-centric lighting
- Fog lamps
- PDAs
- Industrial high-bay lights
- RGB and monochromatic LED drivers for signage and traffic signals
- Automotive exterior and interior lighting
- Accurate LED current matching
