IRSM836-035MB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 31-PowerVQFN |
| Number of Pins | 27 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tray |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 27 |
| Applications | Appliance |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 36W |
| Technology | UMOS |
| Voltage - Supply | 13.5V~16.5V |
| Terminal Position | QUAD |
| Supply Voltage | 15V |
| Base Part Number | IRSM836-035 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Max Output Current | 3A |
| Interface | Parallel |
| Analog IC - Other Type | AC MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 36W |
| Max Supply Current | 10mA |
| Turn On Delay Time | 1.5 μs |
| Logic Function | AND |
| Turn-Off Delay Time | 1.5 μs |
| Collector Emitter Voltage (VCEO) | 500V |
| Max Collector Current | 3A |
| Voltage - Load | 400V Max |
| Number of Drivers | 6 |
| Isolation Voltage | 1.5kV |
| Switching Frequency | 20kHz |
| Motor Type - AC, DC | AC, Synchronous |
| Height | 950μm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRSM836-035MB Overview
Drivers controllers is designed with Tray package.There is 31-PowerVQFN case included with the part.Drivers controllers is recommended to mount the part by Surface Mount.Fits the component connected to Appliance.13.5V~16.5V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of -40°C~150°C TJdegrees Celsius.Drivers controllers is possible to categorize the motor type as AC, Synchronous.This part provides 27terminations.In this case, the voltage can be applied to the load at the rate of 400V Max.Drivers controllers is recommended that this amplifier be run at 15V.A Surface Mountmounting method is recommended for this product.There is an analog integrated circuit AC MOTOR CONTROLLERpresent in the device.The part number IRSM836-035indicates that it is found.Drivers controllers is designed wDrivers controllersh 27 pins.The Motion Control Electronicsseries includes this item.1outputs are available.In order to achieve the operation requirements, the maximal output current reaches [0].The device is equipped with 6 drivers.
IRSM836-035MB Features
Applications : Appliance
Load voltage across the chip 400V Max
base on IRSM836-035 number
designed with 1 outputs
with 6 Drivers
IRSM836-035MB Applications
There are a lot of Infineon Technologies IRSM836-035MB motor drivers applications.
- Industrial high-bay lights
- PDAs
- Indicator
- Dome
- LED bias
- PWM generators
- Lighting for health and wellbeing
- General lighting
- Brake lights
- Side marker lights
