IRU3037ACFTRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRU3037ACFPBF |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.2V~25V |
| Control Features | Enable, Soft Start |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 440kHz |
| Max Duty Cycle | 90 % |
| Clock Sync | No |
| Height | 939.8μm |
| Length | 3.0988mm |
| Width | 4.4958mm |
| RoHS Status | RoHS Compliant |
IRU3037ACFTRPBF Overview
Capsuled in the 8-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 4.2V~25V and has a 4.2V~25V supply voltage. Worked in an dc switcher with a 0°C~70°C TA rating. Using this switching controller, it is possible to switch at 400kHz. dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Enable, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 8 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "IRU3037ACFPBF". Switching converter has a total of 8 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. DC regulator outputs 800mV voltage based on test statistics. If you start a project, note down the dc dc regulator's usual output current of 15A. The maximum duty cycle of this voltage regulator dc to dc is set to 90 % to ensure reliability during power-up and power-down. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. DC regulator has a maximum frequency of 440kHz.
IRU3037ACFTRPBF Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
IRU3037ACFTRPBF Applications
There are a lot of Infineon Technologies IRU3037ACFTRPBF DC to DC converter applications.
- Hydro power
- Product testing
- Servo drive system
- Product burn-in
- Medical equipment
- Arc suppression circuits
- Combined machine tools
- Machining centers
- Nuclear power plants
- Linear guide
