IRU3037CF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 220kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRU3037CF |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 24V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 25V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 4.2V~25V |
| Quiescent Current | 3.3mA |
| Control Features | Enable, Soft Start |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 90 % |
| Clock Sync | No |
| Height | 1.05mm |
| Length | 3mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IRU3037CF Overview
Capsuled in the 8-TSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. Packaging for the pmic consists of Tube solid enclosures. The system can process Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4.2V~25V. Suitable for work in a 0°C~70°C TA dc switcher. Switching can be done at 200kHz with this switching controller. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 8 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "IRU3037CF". 8 pins are present on switching converter. Based on the test statistics, DC regulator outputs voltage 24V. You should note that the dc dc regulator's usual output current is 500mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 90 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. The switching controller works at a frequency of 220kHz. To operate the voltage regulator dc to dc safely and reliably, users should apply 25V. As long as the dc switching is in a dormant state, it utilizes 3.3mA.
IRU3037CF Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
Frequency: 220kHz
IRU3037CF Applications
There are a lot of Infineon Technologies IRU3037CF DC to DC converter applications.
- Fire elevators
- Automation technology
- Laboratories
- Large fire protection systems
- Ball screw pair
- SMT equipment
- Various precision measuring detectors
- Experimental setup
- Textile machinery
- Surge protection circuits
