IRU3037CFTRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 200kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRU3037CFPBF |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 24V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 16A |
| Voltage - Supply (Vcc/Vdd) | 4.2V~25V |
| Control Features | Enable, Soft Start |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 90 % |
| Duty Cycle (Max) | 90% |
| Clock Sync | No |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
IRU3037CFTRPBF Overview
This switching controller fits most application requirements since it is packaged in a 8-TSSOP (0.173, 4.40mm Width) package. The dc motor controller is adquate to generate for 1 outputs. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. Voltages 4.2V~25V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a 0°C~70°C TA dc switcher. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Enable, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 5V. Searching "IRU3037CFPBF" will return other relevant dc to dc converter ics. Pins number 8 of switching converter in total. A 24V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 16A. A duty cycle set at 90 % ensures voltage regulator dc to dc reliability during power-on and power-off. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controller operates at a frequency of 200kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 12V.
IRU3037CFTRPBF Features
Transistor Driver Outputs
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
Frequency: 200kHz
IRU3037CFTRPBF Applications
There are a lot of Infineon Technologies IRU3037CFTRPBF DC to DC converter applications.
- Remotely powered electric motors
- ATMs
- Digital display device
- Sensitive electronic devices
- Post equipment
- Wind power
- USB circuits
- Printing
- Television equipment
- Smart grid
