IRU3037CS
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 220kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRU3037CS |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.25V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 16A |
| Voltage - Supply (Vcc/Vdd) | 4.2V~25V |
| Quiescent Current | 3.3mA |
| Control Features | Enable, Soft Start |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 90% |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IRU3037CS Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. For outputs of 1, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). 4.2V~25V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with 0°C~70°C TA. With this switching controller, you can switch at 200kHz. Surface Mount makes it suitable for general dc dc regulator. Enable, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. The 8 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. In addition to "IRU3037CS", there are other relevant dc to dc converter ics you can find. Pins number 8 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 1.25V voltage based on test statistics. In most cases, the dc dc regulator's output current is 16A. This information should be noted when you begin working with the component. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 220kHz is set for the switching controller. A dc switching in a dormant state uses 3.3mA.
IRU3037CS Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Frequency: 220kHz
IRU3037CS Applications
There are a lot of Infineon Technologies IRU3037CS DC to DC converter applications.
- Pipe bending machines
- Elevator lighting
- Combined machine tools
- Geothermal power
- Linear guide
- Electrical distribution systems
- Adjustable voltage or current linear circuits
- Overvoltage protection circuits in TV sets
- Textile machinery
- Printing
