IRU3037CSPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRU3037CSPBF |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 24V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 16A |
| Voltage - Supply (Vcc/Vdd) | 4.2V~25V |
| Max Supply Current | 5mA |
| Quiescent Current | 3.3mA |
| Control Features | Enable, Soft Start |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 90 % |
| Clock Sync | No |
| Height | 1.37mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IRU3037CSPBF Overview
With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of handling Transistor Driver dc switching's outputs (s). A 4.2V~25V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a 0°C~70°C TA. Switching can be done at 200kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. Enable, Soft Start is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at DUAL. Different dc switching's functions can be applied to 8 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. Other relevant dc to dc converter ics will be returned if you search "IRU3037CSPBF". 8 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, DC regulator outputs 24V volts. If you start a project, note down the dc dc regulator's usual output current of 16A. It is set to 90 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Switching controllers operate at 400kHz frequencies. As long as the dc switching is in a dormant state, it utilizes 3.3mA. There is a possibility that a current higher than 5mA will cause improper operation of the component and possibly damage switching voltage regulators.
IRU3037CSPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
Frequency: 400kHz
IRU3037CSPBF Applications
There are a lot of Infineon Technologies IRU3037CSPBF DC to DC converter applications.
- PSRR circuits
- Fire elevators
- Digital display device
- Lathes
- Photovoltaic power
- Linear guide
- Communication system
- Printing equipment
- Digital precision reference circuits
- Radio equipment
