IRU3037CSTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 220kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IRU3037CS |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 24V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 4.2V~25V |
| Quiescent Current | 3.3mA |
| Control Features | Enable, Soft Start |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 90 % |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IRU3037CSTR Overview
With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 4.2V~25V voltage are supplied and operated. Suitable for working in an dc switcher that has a 0°C~70°C TA. Switching can be done at 200kHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 8 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 5V. Other relevant dc to dc converter ics can be found by searching "IRU3037CS". The switching converter has a total of 8 pins. The type is a particular Switching Regulator or Controllers of switching converter. Test statistics indicate DC regulator outputs 24V voltage. It's important to remember that the dc dc regulator's normaloutput current is 500mA, so you should note it down when starting a new project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 90 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controllers work at 220kHz Hz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 12V. In dormant mode, 3.3mA is used.
IRU3037CSTR Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
Frequency: 220kHz
IRU3037CSTR Applications
There are a lot of Infineon Technologies IRU3037CSTR DC to DC converter applications.
- Laboratories
- Constant current circuits
- Domestic water pumps
- Various CNC machine tools
- Automatic plug-in machines
- Digital display device
- Balance equipment
- Bending machines
- Computed tomography (CT)
- Sink circuits
