IS31BL3212-DLS2-TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Pin Count | 8 |
| Number of Outputs | 4 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 23mA |
| Max Supply Current | 1mA |
| Output Current per Channel | 23mA |
| Internal Switch(s) | Yes |
| Number of Segments | 4 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
IS31BL3212-DLS2-TR Overview
There is also a 8-WFDFN Exposed Pad package that is used to save space on the board. In LED drivers, the outputs are all set to 4.To mount, use Surface Mount.It is highly performing and reliable when it emerges as a Linear.The led light driver can work at -40°C~85°C TA.Backlight has considerable advantages.For its operation, 8 terminations are designed.Its configuration is based on 8 pins.If the voltage supply is lower than 2.7V, undetermined failures may occur.A total of 4 segments are estimated.Surface Mount is mounted in the way.As a maximum value, 5.5V is acceptable.In this device, there are 8 pins.Furthermore, it can be categorized as Display Drivers based on its characteristics.As a result, it is designed to operate at a minimal voltage of 2.7V to ensure the most efficiency possible.If the maximum current supply is less than 1mA, this device provides high efficiency.There is no current that can be supplied to the load.
IS31BL3212-DLS2-TR Features
Available in the 8-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
IS31BL3212-DLS2-TR Applications
There are a lot of ISSI, Integrated Silicon Solution Inc IS31BL3212-DLS2-TR LED Driver ICs applications.
- LED headlights
- Linear fluorescent
- Medical surgery lighting
- Museum lighting
- LED Lightings for Industrial Equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Panel lighting
- Down lighting
