banner_page

IS31FL3193-DLS2-TR

0.5mm PMIC 10 Pin 400kHz 5V 10-VFDFN Exposed Pad


  • Manufacturer: ISSI, Integrated Silicon Solution Inc
  • Nocochips NO: 413-IS31FL3193-DLS2-TR
  • Package: 10-VFDFN Exposed Pad
  • Datasheet: -
  • Stock: 885
  • Description: 0.5mm PMIC 10 Pin 400kHz 5V 10-VFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 10-VFDFN Exposed Pad
Number of Pins 10
Operating Temperature -40°C~85°C TA
Packaging Cut Tape (CT)
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 10
ECCN Code EAR99
Type Linear
Subcategory Display Drivers
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.5mm
Frequency 400kHz
Number of Outputs 3
Max Supply Voltage 5.5V
Min Supply Voltage 2.7V
Output Current 42mA
Max Supply Current 800μA
Output Current per Channel 42mA
Internal Switch(s) Yes
fmax-Min 0.4 MHz
Number of Segments 3
Voltage - Supply (Min) 2.7V
Data Input Mode SERIAL
Height Seated (Max) 0.8mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

IS31FL3193-DLS2-TR Overview


Space is saved using its 10-VFDFN Exposed Pad package. A LED driver using this design has 3 outputs.The led driver mounting is done by using Surface Mount.With high efficiency and reliable performance, it emerges as a Linear.This LED driver can be operated at a temperature of -40°C~85°C TA. It operates based on the frequency of 400kHz.There are 10 terminations associated with it.Its configuration is based on 10 pins.If the voltage supply is below 2.7V, undetermined failures may occur.The number of segments is estimated to be 3.It's mounted in Surface Mount.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.As a result, it can also be classified as Display Drivers.A minimum supply voltage of 2.7V is required to meet the highest efficiency standards.If the maximum current supply is less than 800μA, this device provides high efficiency.The current that can be supplied to the load is 42mA.

IS31FL3193-DLS2-TR Features


Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 400kHz
Supply voltage of 5V

IS31FL3193-DLS2-TR Applications


There are a lot of ISSI, Integrated Silicon Solution Inc IS31FL3193-DLS2-TR LED Driver ICs applications.

  • Medical surgery lighting
  • Panel lighting
  • Refrigeration lighting
  • Constant Voltage Power Source for portable equipment
  • White LED Backlight for portable equipment
  • LED Lightings for Inspection Devices
  • Ultraviolet (UV) and Infrared (IR) Irradiation Devices
  • Sports Facility Lighting
  • Down lights
  • Down lighting

Write a review

Note: HTML is not translated!
    Bad           Good