IS31FL3218-QFLS2-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 400kHz |
| Number of Outputs | 18 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 38mA |
| Max Supply Current | 5.25mA |
| Output Current per Channel | 38mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | I2C |
| Number of Segments | 18 |
| Voltage - Supply (Min) | 2.7V |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
IS31FL3218-QFLS2-TR Overview
In order to save board space, the led driver uses the 24-WFQFN Exposed Pad package. LED drivers are designed with 18 outputs.The mounting method adopted is Surface Mount.When it emerges as a Linear, it shows high-performance and reliability.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.The frequency of 400kHz is used as the basis for its operation.It operates with terminations of 24.A configuration of this chip is made up of 24 pins.If the voltage supply is less than 2.7V, undetermined failures will occur.A total of 18 segments have been created.Surface Mount is mounted in the way.It is acceptable to supply voltages of 5.5V.Moreover, it can be classified as Display Drivers due to its characteristics.As a result, it runs at a minimal voltage of 2.7V in order to achieve the best efficiency.In order to maintain maximum efficiency, the supply current cannot exceed 5.25mA.A load can be supplied with 38mA current.
IS31FL3218-QFLS2-TR Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 400kHz
Supply voltage of 3.6V
IS31FL3218-QFLS2-TR Applications
There are a lot of ISSI, Integrated Silicon Solution Inc IS31FL3218-QFLS2-TR LED Driver ICs applications.
- Museum lighting
- LED backlight driver for LCD displays for portable equipment
- Portable lighting
- General lighting
- LED Lighting PFCs, Linear Dimmable
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED Lightings for Inspection Devices
- High-end retail lighting
- Stage Lighting and Signage
- Architectural lighting
