Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
68 |
Packaging |
Bulk |
Published |
1996 |
JESD-609 Code |
e0 |
Moisture Sensitivity Level (MSL) |
4 |
Number of Terminations |
68 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
HTS Code |
8542.31.00.01 |
Subcategory |
Microprocessors |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
225 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Frequency |
20MHz |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
68 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Voltage |
5V |
uPs/uCs/Peripheral ICs Type |
MICROPROCESSOR |
Supply Current-Max |
310mA |
Bit Size |
16 |
Frequency (Max) |
20MHz |
Data Bus Width |
16b |
Address Bus Width |
24 |
Boundary Scan |
NO |
Low Power Mode |
YES |
Format |
FIXED POINT |
Integrated Cache |
NO |
Height Seated (Max) |
4.57mm |
Length |
24.23mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
IS80C286-20 Overview
Since the microprocessor is packed in PLCC, shipping overseas is convenient. In order to provide high reliability, advanced packaging method Bulk is used. I would rate this as a MICROPROCESSOR for the uPs/uCs/Peripheral ICs type. In total, there are 68 terminations. Turning on and running the embedded microprocessor with a 5V voltage supply should be possible. 16-Bit is its architecture. CPUs operate with a frequency of 20MHz Hz. Please refer to the datasheets for 68 pins functions. Typical Microprocessors cpu microprocessor. The size of data Bus of the CPU is based on 16b-bit system. An environment with a temperature higher than 85°C is not recommended for the embedded microprocessor. There are 68 pins injected into the embedded microprocessor body. With the Surface Mount mounted, this CPU is widely used in a wide range of applications. In this case, the CPU should reach 20MHz as its top frequency. There is a 5V function for the micro processor. In the datasheet, 5V power supplies are required for this embedded microprocessor. It is 5V on the CPU's core. A CPU can receive voltage 310mA higher than 310mA.
IS80C286-20 Features
16-Bit Structure
16b-Bit Data Bus Width
IS80C286-20 Applications
There are a lot of Intersil (Renesas Electronics America) IS80C286-20 Microprocessor applications.
- Electrocardiogram (EKG)
- Automatic control
- Tape drives
- Virtual reality VR robots
- Xbox
- Accu-check
- Computers and laptops-video calling, email, blogging
- Multi-meter
- Graphic terminals
- Magnetic resonance imaging (MRI)