IS82C54-10Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Packaging | Bulk |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Frequency | 12MHz |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10mA |
| uPs/uCs/Peripheral ICs Type | TIMER, PROGRAMMABLE |
| Number of Bits | 16 |
| Propagation Delay | 100 ns |
| Turn On Delay Time | 100 ns |
| Number of Timers/Counters | 1 |
| High Level Output Current | -2.5mA |
| Low Level Output Current | 2.5mA |
| Information Access Method | PARALLEL, DIRECT ADDRESS |
| Height | 3.69mm |
| Length | 11.58mm |
| Width | 11.58mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IS82C54-10Z Overview
In the packaging, the clock timer is enclosed with the PLCC code on the back. The frequency of the programmable timer is set to 12MHz.It is used to pack in Bulk case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 10mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The timer clock contains 28 pins. The digital timer's operating supply voltage is rated 5V voltage. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 28 . The number of the chip's terminations sums up to 28. The timer clock has 4.190003g in weight. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 5.5V. The number of Timers/Counters on the device is 1.
IS82C54-10Z Features
Operate frequency at 12MHz
Package / Case: Bulk
Max Operating temperature at -40°C
1 Timers/Counters
IS82C54-10Z Applications
There are a lot of Intersil (Renesas Electronics America) IS82C54-10Z Programmable Timers & Oscillators applications.
- Remote Sensors
- “Heartbeat” Timers
- Power-On Reset Timer
- Electric Vehicles
- Motor control
- Remote Data-Logger
- Safety and Security Platforms
- Thermostats
- Delay circuits
- White Goods
