Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
28 |
Published |
1996 |
JESD-609 Code |
e3 |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
245 |
Supply Voltage |
5V |
Frequency |
8MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Operating Supply Voltage |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
10mA |
uPs/uCs/Peripheral ICs Type |
TIMER, PROGRAMMABLE |
Number of Bits |
16 |
Propagation Delay |
150 ns |
Number of Timers/Counters |
1 |
High Level Output Current |
-2.5mA |
External Data Bus Width |
8 |
Low Level Output Current |
2.5mA |
Information Access Method |
PARALLEL, DIRECT ADDRESS |
Height Seated (Max) |
4.57mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
IS82C54Z96 Overview
It is enclosed in the PLCC packaging along with the digital timer. In the programmable timer, the frequency is set to 8MHz.To mount this digital timer with Surface Mount. The operating supply voltage is rated at 10mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The timer clock contains 28 pins. The digital timer's operating supply voltage is rated 5V voltage. The supply voltage of the programmable timer can rate 5V. The number of the chip's terminations sums up to 28. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 5.5V. The number of Timers/Counters on the device is 1.
IS82C54Z96 Features
Operate frequency at 8MHz
Max Operating temperature at -40°C
1 Timers/Counters
IS82C54Z96 Applications
There are a lot of Intersil (Renesas Electronics America) IS82C54Z96 Programmable Timers & Oscillators applications.
- Home Automation Sensors
- Always On Systems
- Remote Sensors
- Building Automation
- “Heartbeat” Timers
- Watchdog Timers
- Domestic appliances
- Energy Harvesting Systems
- Long Time One Shot
- Motor control