ISL2101AAR3Z-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | DFN EP |
| Number of Pins | 9 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 9 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 114V |
| Min Supply Voltage | 9V |
| Power Dissipation-Max | 2.27W |
| Nominal Supply Current | 2.5mA |
| Max Supply Current | 2.5mA |
| Current - Output | 2A |
| Turn On Delay Time | 8 ns |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Turn-Off Delay Time | 6 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 2A |
| High Side Driver | YES |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
ISL2101AAR3Z-T Overview
In order to increase flexibility, the package DFN EP is used.Gate drivers is configured wGate driversh 2 drivers.9 terminations constitute its foundation.Mosfet driver is mounted using Surface Mount.The pins are configured with 9 when designing the chip.With a supply voltage of 12V, it is designed to operate.The interface chip of the system is HALF BRIDGE BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 2A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Mosfet gate drivers is permissible to operate at a temperature of 125°C.Minimum operating temperatures are allowed to be -40°C.For higher stability, the supply current should be kept at 2.5mA.The maximum voltage for operation is 114V.In order for the device to operate, a supply voltage of 9V must be applied.In this case, the current output is 2A.
ISL2101AAR3Z-T Features
2 drivers
9 pins
ISL2101AAR3Z-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL2101AAR3Z-T gate drivers applications.
- Industrial Modules
- Isolated switch mode power supplies (SMPS)
- Topologies
- AC-DC Inverters
- Isolated Supplies for Motor Control
- LCD/LCoS/DLP portable and embedded pico projectors
- Pulse transformer drivers
- Uninterruptible Power Supplies (UPS)
- Dual-Battery Systems
- serial peripheral interface (SPI), I2C
