ISL2110AR4Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | DFN |
| Number of Pins | 12 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Qualification Status | Not Qualified |
| Max Output Current | 4A |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 114V |
| Min Supply Voltage | 8V |
| Power Dissipation-Max | 3.1W |
| Nominal Supply Current | 5mA |
| Max Supply Current | 5mA |
| Current - Output | 4A |
| Rise Time | 9ns |
| Fall Time (Typ) | 7.5 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 4A |
| High Side Driver | YES |
| Turn Off Time | 0.06 µs |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
ISL2110AR4Z Overview
For greater flexibility, the DFN package is adopted.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Its configuration starts with 12 terminations.The mount method is Surface Mount.The pins are configured with 12 when designing the chip.Mosfet driver is designed specifically to run on 12V volts of power.Mosfet driver is equipped wMosfet driverh an interface chip HALF BRIDGE BASED MOSFET DRIVER.4A is the maximum output current.Several electronic components are included in its subcategory of MOSFET Drivers.There is a maximum operating temperature of 125°C.Operating temperatures can be as low as -40°C.Mosfet gate drivers is recommended that you keep the supply current at 5mA in order to achieve greater stabilMosfet gate driversy.When the supply voltage is 114V, it is at its maximum operation.The supply voltage of 8V is its minimum value for operation.As a result, it outputs a 4A current.
ISL2110AR4Z Features
2 drivers
12 pins
ISL2110AR4Z Applications
There are a lot of Intersil (Renesas Electronics America) ISL2110AR4Z gate drivers applications.
- DC/DC converters
- Commercial air-conditioning (CAC)
- Motor Control
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor Controls
- Solar inverters
- Telecom switch mode power supplies
- Smart Phones
- High-speed communications
- Portable computers
