ISL28005FH50Z-T7A
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 62μA |
| Accuracy | 2 % |
| Slew Rate | 0.67 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 4.7μA |
| Output Current per Channel | 8.7mA |
| Input Offset Voltage (Vos) | 1.2mV |
| Bandwidth | 160 kHz |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| -3db Bandwidth | 160 kHz |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23-5 |
| Number of Pins | 5 |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Pin Count | 5 |
| Output Type | Voltage |
| Operating Supply Voltage | 24V |
| Temperature Grade | AUTOMOTIVE |
ISL28005FH50Z-T7A Overview
Packaged in a SOT-23-5 case, the buffer op amp is ready to use. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. During the past two weeks, there have been close to 5 terminations. In this case, there are 5 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 12V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 5 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 1.2mV. In order for this instrumentation amplifier to operate, the supply current needs to be between 50μA and 10 . It is recommended to keep the voltage gain at 33.98dB at all times. Op amp ic has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Voltage signals. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. It is recommended that op amp be used at temperatures below 125°C. The operating supply voltage of instrumentation amplifier is rated 24V voltage. The electrical part is capable of being powered by a voltage of under 28V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.7V.
ISL28005FH50Z-T7A Features
5 Pins
supply voltage of 12V
33.98dB voltage gain
Output Type: Voltage
ISL28005FH50Z-T7A Applications
There are a lot of Intersil (Renesas Electronics America) ISL28005FH50Z-T7A Instrumentational OP Amps applications.
- Power transmission
- Industrial control system
- Medical instruments
- Voltage regulation circuit
- Vehicle electronics
- Car stereo
- RF cable systems
- Gaming industry
- Image computer boards
- Industrial applications including automation
